《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

基于C/S和B/S混合结构的模具协同设计系统*

作者:李志华1,赵顺丹1,金 祁2 日期:2008-04-17/span> 浏览:3056 查看PDF文档

基于C/S和B/S混合结构的模具协同设计系统*
李志华1,赵顺丹1,金 祁2
(1.杭州电子科技大学 机械工程学院,浙江 杭州 310018; 2.浙江嘉仁模具有限公司,浙江 黄岩 318020)

摘 要:注塑模具的开发过程是一个典型的多方协作的过程。从同步和异步协同的角度,分析了模具协同设计系统的功能需求、体系结构和关键技术,构建了一个基于C/S和B/S混合结构的协同设计系统,较好地解决了多方协作中的信息共享和交流问题,以及模具企业与客户就塑料件及模具CAD模型进行同步协同的问题。
关键词:协同设计;同步;异步;C/S;B/S


A mould collaborative design system based on the mixed structure of C/S and B/S
LI Zhihua1, ZHAO Shundan1, JIN Qi2
(1.College of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China;
2.Zhejiang Jiaren Mould Co., Ltd., Huangyan 318020 ,China)

Abstract: The developing process of plastic mould is a typical multiuser collaboration. The functional requirements, architecture and key technologies of the mould collaborative design system from both synchronous and asynchronous collaborative perspective were analyzed, a collaborative design system based on a mixed structure of C/S and B/S was constructed. The system solves the issues of information sharing and exchange in multiuser, as well as synchronized collaboration between mould enterprises and customers on the CAD models of plastic product or mould.
Key words: collaborative design; synchronization; asynchronization; C/S; B/S



友情链接

浙江机械信息网