《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

双正交提升小波在非对称表面形貌分析中的应用

作者:陈江龙,吴立群,吕晶晶 日期:2008-02-25/span> 浏览:3155 查看PDF文档

双正交提升小波在非对称表面形貌分析中的应用

陈江龙,吴立群,吕晶晶
(杭州电子科技大学 机械工程学院,浙江 杭州 310018)

摘要:由平顶珩磨获得的表面形貌是非对称的、多尺度的,而传统滤波函数处理这类表面形貌时存在畸变效应。利用双正交小波的优点,使用提升方案,采用边界对称延拓策略,解决了传统滤波函数在突变处和边界处的畸变效应,并以缸套内表面为例,选用bior4.4双正交小波,证明了提升双正交小波在表面形貌分析中的改善作用。
关键词:表面形貌;畸变效应;双正交小波;提升方案
中图分类号:TH161.14;TN919.8文献标识码:A文章编号:1001-4551(2008)02-0070-04

Application of biorthogonal wavelet lifting scheme in analysis of the antisymmetric surface topography
CHEN Jianglong, WU Liqun, LV Jingjing
(College of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China)
Abstract: Some machined surface such as plateau honing surface are antisymmetrical and multiscaling, though the traditional filtering functions exist distortion effects when the functions are applied on a such surface. taking the inner surface of cylinder as the research object, a deeply study on skew surface topography with wavelet lifting scheme was made. According to the characteristic of the antisymmetrical topography, the data acquired from the research object, using the bior4.4 biorthogonal wavelet with symmetric extension methods, was processed and analyzed, and the border effects were finally resolved.
Key words: surface topography; distortion effect; biorthogonal wavelet; lifting scheme
参考文献(Reference):
[1]WHITEHOUSE D J. Handbook of Surface Metrology[M]. 1st ed. Bristol and Philadephia: Institute of physics publishing,1994.
[2]曾文涵.双树复小波表面分析模型及加工过程形貌辨识方法研究[D].武汉:华中科技大学,2005.
[3]飞思科技产品研发中心.小波分析理论与Matlab 7实现[M].北京:电子工业出版社.2006.
[4]DAUBECHIES I, SWELDENS W. Factoring wavelet transforms into lifting steps[J]. Jourier Anal Appl,1998,4(3):247-269.
[5]胡广书.现代信号处理教程[M].北京:清华大学出版社,2004.
[6]唐金山.正交小波变换中边界的零延拓及其无失真恢复[J].电子学报,1999,27(1):89-92.
[7]吴立群.薄壁缸套内孔微坑式平顶珩磨质量小波评定方法研究[J].机电工程,2001,18(5):143-144.
[8]权太伟.偏态表面形貌分形建模与滤波方法研究[D].杭州:杭州电子科技大学,2006.



友情链接

浙江机械信息网