《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

分切机废边清理机构的创新性设计

作者:毕艳霞,周继烈 日期:2008-02-25/span> 浏览:3166 查看PDF文档

分切机废边清理机构的创新性设计

毕艳霞,周继烈
(浙江大学 现代制造工程研究所,浙江 杭州 310027)

摘要:通过研究目前分切机清废系统存在的问题,在参考原机械式缠绕机的基础上,提出了简易闭环控制张力自整定原理,并重新设计了一款废边收卷机。经现场使用表明,其运行效果良好,可以满足不同材质和宽度的废边的收集,不仅解决了原废料筐收集的占地及搬运问题,而且彻底解决了原机械式缠绕机的同步问题,大大提高了生产效率。
关键词:废边;收卷同步;张力自整定
中图分类号:TS733+.8文献标识码:B文章编号:1001-4551(2008)01-0060-03

Innovative design of clearing slitter edge machine for slitter
BI Yanxia, ZHOU Jilie
(Institute of Advance Manufacturing Engineer, Zhejiang University, Hangzhou 310027, China )
Abstract: After studying and analyzing the problem in clearing slitter edge, a simple closed loop control system for adjusting tension was brought forward and a new winding machine for slitter edge was designed, based on the principle of the old winding machine. It shows good performance in practical manufacturing and improves the producing efficiency. It can adapt to collect slitter edge of different material and width. Not only the problem of accounting large area for using baskets which are difficult to be moved in collecting slitter edge is solved, but also the synchronization problem of the old machine is solved thoroughly.
Key words: slitter edge; winding synchronization; tension selfadjusting
参考文献(Reference):
[1]李志鹏,李兴根.分切机上位机控制系统的设计[J].轻工机械,2006,24(3):90-92.
[2]王小翠,李福援,赵美宁.空气动力学理论在分切机清废机构设计中的应用[J].中国制造业信息化,2005,34(12):64-65.
[3]孙智慧,岳亚东,刘晔哈.卷带包装材料连续供送恒张力控制系统的设计[J].农业机械学报,2006,8(8):208-210.
[4]李方园,张卫江.浅谈分切机中变频器的应用[J].中国造纸,2006,25(1):54-57.
[5]邓星钟,周祖德,邓坚.机电传动控制:第2版[M].武汉:华中理工大学出版社,1998.
[6]濮良贵,纪名刚.机械设计:第7版[M].北京:高等教育出版社,2001.
[7]宋天民.焊接残余应力的产生与消除:第1版[M].北京:中国石化出版社,2005.



友情链接

浙江机械信息网