基于DSP控制的隔离型功率因数校正变换器研究

作者：王莹莹，吕征宇 日期：2007-10-24/span> 浏览：3102 查看PDF文档

基于DSP控制的隔离型功率因数校正变换器研究

王莹莹，吕征宇
（浙江大学 电力电子国家专业实验室，浙江 杭州 310027）

摘要：采用全桥拓扑结构作为实验研究的主电路，并在全桥的输入端增加传统Boost型功率因数校正变换器(PFC)的输入电感，构成隔离型PFC。对该隔离型PFC的基本工作原理进行简单分析，并通过与传统PFC等效的方式对该主电路建立小信号动态模型。在DSP控制技术的基础上，具体分析了针对隔离型PFC变换器的控制方案，并实现之，获得良好的动态响应特性和稳态调节特性。最后，制作了试验样机，验证了该隔离型变换器的优良性能，其满载功率因数达到0.995。
关键词：数字控制；功率因数校正；电力电子
中图分类号：TN624文献标识码：A文章编号：1001-4551(2007)09-0086-04

Research of isolated tyep power factor correction converter based on DSP
WANG Yingying, LV Zhengyu
(National Laboratory of Power Electronic, Zhejiang University, Hangzhou 310027, China)
Abstract: Topology of fullbridge structure was adopted as main circuit for isolated type power factor correction converter. Furthermore, the input inductor of the conventional Boost type power factor correction converter was added. The operation principle of the main circuit was briefly analyzed, and the smallsignal dynamic model was concluded by comparing the full bridge PFC converter and the conventional PFC. Based on the platform of DSP, control strategy for the isolated type PFC converter was investigated in details. Both voltage and current control loop were adopted, excellent dynamic characteristic and steady modulating characteristic were achieved. Finally, an experimental prototype was built to verify the performance of the converter. Experiment result shows that, the PF value is 0.995 of full load.
Key words: digital control; power factor correction(PFC); power electronic

参考文献(Reference)：
［1］吕征宇,钱照明.Green T C.软开关AC/DC变换器的电磁干扰研究［J］.中国电机工程学报，2000,20(7):14-18.
［2］WANG Q, YAO W ZH, LIU J J. Harmonic source and compensation characteristics of active power［J］. Proceedings of the CSEE, 2001, 21(2):16-20.
［3］王海时，林薇， 刘云高，等. 一种新颖的PFC控制策略［J］. 中国集成电路，2006，15(8):34-36，29.
［4］YANG E X, JIANG Y,HUA G， et al. Isolated Boost Circuit for Power Factor Correction ［C］∥Proc. IEEE APEC, 1993:196-203.
［5］林良锐，张卫平，张东彦，等.具有谐振模式PFC的单级AC／DC变换器的分析［J］.北方工业大学学报，2006,18(3):20-25.