《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

CANopen协议剖析及其在伺服电机控制中的实现

作者:邓遵义,宁 t 日期:2007-08-31/span> 浏览:3221 查看PDF文档

                                                CANopen协议剖析及其在伺服电机控制中的实现*
                                                                          邓遵义,宁 t
                                           (河南工业大学 机器人研究所,河南 郑州 450007)

摘 要:对CAN总线的应用层CANopen协议进行介绍,着重分析了CANopen协议的对象字典、设备模型和通讯对象等重要概念。并以伺服电机的控制为例,阐述了CANopen协议的软件实现过程。研究结果表明,CANopen协议精练、透明,便于理解,降低了驱动程序的开发难度,具有广泛的应用前景。
关键词:CAN总线;CANopen协议;伺服控制


                               Analysis of CANopen and implementation in the control of servo motor
                                                      DENG Zunyi, NING Yi
(Research Institute of Robotics, Henan University of Technology, Zhengzhou 450007, China)

Abstract: The CANopen protocol which is the application layer of CAN bus was introduced,and the object dictionary,the device modle,the communication objects,and so on were mainly analyzed.Taking the control of actuating motor for example, the process of realization for CANopen protocol was illuminated. The results of the research show that, CANopen protocol is refining, transparence, and its easy to comprehension, reduces the difficulty of drive program development, illustrates a good prospect of application and extension.
Key words: CAN bus; CANopen protocol; servo control

参考文献(Reference):
[1]郇 极,杨 斌,魏继光.一种开放式的现场总线协议CANopen[J].制造业自动化,2002,24(10):34-35.
[2]吕京建,张宏韬.CAN总线的浅析CANopen协议[J].电子产品世界,2002(17):24-27.
[3]李 冰,戚 建,刘国良,等.CANopen总线协议在铺机上的应用[J].建筑机械,2003(1):29-31.
[4]CAN in Automation. CANopen Application Layer and Communication Profile[M]. CiA Draft Standard 301,Version 4.02,2002.
[5]CAN in Automation. Device Profile Drivers and Motion Control[M]. CiA Draft Standard Proposal 402,Version 2.0,2002.
[6]NEGLEY B. Getting control through CAN[J]. Sensors,2000,17(10):18-34.



友情链接

浙江机械信息网