基于Pro/E的屏蔽电泵三维造型与机构仿真

作者：吴 婷，张礼兵 日期：2007-07-09/span> 浏览：3896 查看PDF文档

                               基于Pro/E的屏蔽电泵三维造型与机构仿真

                                            吴 婷，张礼兵

                   (安徽建筑工业学院 机械与电气工程系，安徽 合肥 230601)

摘 要：在分析屏蔽电泵造型和结构特点的基础上，介绍了基于Pro/E平台的屏蔽电泵二次开发过程，详细说明了主要部件三维实体造型方法，以及整个泵的装配和机构仿真的全过程，摒弃了泵的传统二维设计方法，大大提高了设计效率，为泵三维CAD/CAM提供了强有力的工具,具有广阔的应用前景。
关键词：屏蔽电泵；三维造型；机构仿真；Pro/E

3dimention modeling and mechanism emulation of canned motor pump based on Pro/E
                                          WU Ting， ZHANG Libing
（Department of Mechanical & Electrical Engineering, Anhui Institute of Architecture & Industry, Hefei 230601, China）
Abstract: On the analysis of modeling and structure of canned motor pump, a process of the pumps secondary development was introduced, based on Pro/E. The main parts 3dimention modeling and the whole pumps assembling and mechanism emulation were explained in detail, which abandons the traditional 2D design method, and a strong tool for pump CAD/CAM was offered. It has expansive foreground of application.
Key words: canned motor pump; 3dimention modeling; mechanism emulation; Pro/E

参考文献(Reference)：
［1］关醒凡．泵的理论与设计［M］．北京：机械工业出版社，1987．
［2］朱庆高，张翠萍.屏蔽电泵的设计和选用［J］.通用机械,2004(1):66-69.
ZHU Qinggao, ZHANG Cuiping. Design and selection of shielded electric motor[J]. General Machinery,2004(1):66-69.
［3］吴 婷．离心泵叶轮三维CAD系统的研究与开发［D］．北京：北京工业大学，2004．
［4］李安虎，李 红，刘炜巍．离心泵过流部件的三维造型［J］．水泵技术，2004(2)：13-16.
LI Anhu, LI Hong, LIV Weiwei. 3Dmodel of moulding parts about centrifugal pump[J]. Pump Technology,2004(2):13-16.
［5］黄圣杰，张益三，洪立群．Pro/E2001高级开发实例［M］．北京：电子工业出版社，2002.