《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

基于Pro/E的渐开线圆柱齿轮三维参数化建模

作者:邹贵平 日期:2007-03-05/span> 浏览:3718 查看PDF文档

基于Pro/E的渐开线圆柱齿轮三维参数化建模
330013   江西交通职业技术学院 邹贵平)
             摘要:利用Pro/Program,在Pro/E环境下进行渐开线圆柱齿轮三维参数化建模,研制出齿轮三维实体造型的自动化设计程序。用户只要输入齿轮的不同设计参数,就可以快速地生成各种不同参数的齿轮实体,极大地方便用户进行圆柱齿轮设计。
             关键词:渐开线圆柱齿轮 Pro/E  参数化  建模
Modeling Of Three-dimensional Parameter For Involute Cylinder Gear Based On  Pro/E
(330013   Jianxi Communications Professional Technical College Zouguiping)
             Abstract : This article uses Pro/Program, carries on the involute cylindrical gears three dimensional parametrization modelling under Pro/E environment, develops the gear three dimensional entity modelling the automated design procedure. So long as the user inputs the gear the different design variable, may produce each kind of different parameter fast the gear entity, the enormous place then user carries on the cylindrical gears design..

Keywords :  Involute Cylinder Gear   Pro/E  Parameter  Modeling

参考文献
[1] 申永胜.机械原理教程[M].北京:清华大学出版社,1999
[2] 黄圣杰等.Pro/Engineer.2001高级开发实例[M].北京:电子工业出版社,2O02
[3] 林清安. Pro/E的Variable Section Sweep 及Program的实例应用[M].机械工业出版社,2O04

[4]林清安.Pro/ENGINEER2000i2零件设计高级篇()[M].北京:清华大学出版社.2001



友情链接

浙江机械信息网