《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

通风与空调系统中风管系统清洗设备的设计*

作者:童建平1,隋成华1,余 文2,唐轶峻1,徐丹阳1,杨 洋1 日期:2010-09-08/span> 浏览:2886 查看PDF文档

通风与空调系统中风管系统清洗设备的设计*

童建平1,隋成华1,余 文2,唐轶峻1,徐丹阳1,杨 洋1

(1.浙江工业大学 理学院,浙江 杭州 310032; 2.杭州通保环境科技有限公司,浙江 杭州 310032)

摘要:利用运动小车上的滚刷扬尘,用吸尘器把灰尘吸出来,是目前国内外风管清洗设备最主要的形式。针对“在有较重积尘的情况下,积尘很难通过长长的风管进入吸尘器”的问题,设计了一种吸尘头,该吸尘头靠抬臂机构预压紧,调整吸尘头与风管之间的距离,并在此基础上设计了一个吸尘头自压紧风管底部的机构,这样机器人在运动时可适应风管不同位置上底部的不平整。即使风管稍有不平或接缝之处,也可以吸尽粉尘。研究结果表明,共用运动平台减轻了维护工作量,降低了清洗设备的制造成本;利用吸尘管形成负压方式,不需在整个风管内形成负压,可以大大降低吸尘电机的功率。
关键词:控制装置;清洗;积尘;风管;吸尘头
中图分类号:TH184;TP212.1
文献标识码:A文章编号:1001-4551(2010)07-0033-04

Design of cleaning equipment of air duct system in heating ventilation and airconditioning system
TONG Jianping1, SUI Chenghua1, YU Wen2, TANG Yijun1, XV Danyang1, YANG Yang1
(1. College of Science, Zhejiang University of Technology, Hangzhou 310032, China; 
2. Hangzhou Tongbao Environment and Technology Co., Ltd., Hangzhou 310032, China)

Abstract: The dust raising by brush on the small car and vacuumed is the mainly of cleaning technology of vent duct at home and abroad. Aiming that the heavier dust is not easily through the long duct, a vacuum head was designed. Through the lifting or dropping the lifting appliance, it could adjust the distance between the air duct and the vacuum head, at the same time there is a selfpressed devices in the vacuum head to suit for the uneven bottom surface of the different location of the duct. Even if the duct is slightly uneven or has seams, the dust can be exhausted. The results indicate that using the same platform can reduce the maintenance workload and manufacturing costs of cleaning equipment. Using the local negative pressure which provided by vacuum tube, the power of motor can be greatly reduced.
Key words: control devicer; cleaning; dust; duct; vacuum head



友情链接

浙江机械信息网