《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

鞋楦夹具设计方法研究*

作者:沈卫平,毛晓捷,武传宇,倪勇 日期:2010-06-28/span> 浏览:2829 查看PDF文档

鞋楦夹具设计方法研究*
沈卫平,毛晓捷,武传宇,倪勇
(浙江理工大学 机械与自动控制学院,浙江 杭州 310018)

摘要:针对鞋楦外形轮廓不能由初等解析曲面构成,需要有效快速提取鞋楦曲面数据信息,提出了一种基于CATIA二次开发的鞋楦表面信息提取方法。对鞋楦表面形状及工艺要求进行了分析,并根据形封闭原理和定位夹紧原则提出鞋楦零件的定位夹紧方案,最后,运用雅可比矩阵进行夹紧计算。研究结果验证了所提的定位夹紧方案的可行性。
关键词:鞋楦;曲面;夹具;形封闭
中图分类号:TP273文献标识码:A文章编号:1001-4551(2010)04-0031-04

Study of shoe last fixture design method

SHEN Weiping, MAO Xiaojie, WU Chuanyu, NI Yong
(College of Mechanical Engineering and Automation, Zhejiang SciTech University, Hangzhou 310018, China)

Abstract: Aiming at shoe last unavailable to use the alphabetic analytic curve surface to describe the contour and extracting information about curve surface effectively, an effective method based on secondary exploitation of CATIA for extracting information from shoe last surface was presented. By analyzing the surface configuration of shoe last and process requirements, the fixture arrangement of shoe last components was proposed based on closed principle and positioning-clamping principle. The arrangement result was tested by applying Jacobian matrix. The result shows that the fixture arrangement scheme is satisfactory with the related process requirements.
Key words: shoe last; curve surface; fixture; form closure
 



友情链接

浙江机械信息网