基于Multisim10 的高频调谐放大电路

作者：崔文华 日期：2010-03-26/span> 浏览：3438 查看PDF文档

基于Multisim10 的高频调谐放大电路

崔文华
（嘉兴学院 机电工程学院，浙江 嘉兴 314001）

摘要：针对高频调谐放大电路传统分析方法较难的问题，采用Multisim10设计和分析电路，可方便地比较仿真数据和真实数据。放大部分用参数扫描法选择合适的元件，选频部分采用了调节输出电压最大以得到调谐电容的方法；对电路输出频率、电压增益、通频带进行了仿真分析，完成了对多输入小信号的放大和选频；分析了负载和结电容Cbc对电路的影响，给出了提高品质因数和解决稳定性的方法。研究结果表明该设计方法合理，性能指标达到设计要求。
关键词：Multisim10.0；调谐放大；参数扫描；虚拟实验；高频电子线路
中图分类号：TN702文献标识码：A文章编号：1001-4551(2010)02-0107-04

High frequency resonant amplifier based on Multisim 10
CUI Wenhua
(College of Mechanical & Electrical Engineering, Jiaxing University, Jiaxing 314001, China)
Abstract: Aiming at the highfrequency tuned amplifier circuit difficultly designed by traditional methods, the simulation data and real data were easily compared by Multisim10. The suitable components of the amplification were selected by parametric scanning analysis. Tuning capacitor of the frequencyselection was gotten by measuring the maximum output voltage. Emulation analysis was conducted for frequency, voltage gain and bandpass, indicating that the multiinput small signal amplification and frequency selection were accomplished. By analyzing load resistance and junction capacitance Cbc, methods of high quality and stability were proposed. The results indicate that the design method is reasonable and performance indicators meet the design requirements.
Key words: Multisim10.0; tuned amplifier; parametric scanning; virtual experiment; high frequency circuits
参考文献(References):
［1］黄培根,任清褒.Multisim10计算机虚拟仿真实验室［M］.北京：电子工业出版社，2008.
［2］严文娟.基于Pspice单调谐放大器的分析与设计［J］.山西电子技术,2008(3):35-36.
［3］曾兴雯，刘乃安，陈健.高频电路原理与分析［M］.3版.西安：西安电子科技大学出版社,2005.
［4］彭庆,张德华.一种谐振直流环逆变控制电路的仿真研究［J］.机电工程,2007，24(11):21-23.
［5］聂典.Multisim 9计算机仿真在电子电路中的应用［M］.北京：电子工业出版社,2007.