《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

平整分卷机组中张力装置的非线性有限元建模

作者:刘荣,蒋松 日期:2009-08-18/span> 浏览:2980 查看PDF文档

平整分卷机组中张力装置的非线性有限元建模

刘荣,蒋松
(中冶赛迪工程技术股份有限公司,重庆 400013)

摘要:为了实现对平整分卷机组中张力装置产生的张力的有效计算和预报,采用了大型商用有限元软件MSC.MARE,完成了平整分卷机组中张力装置的非线性有限元建模,实现了对张力装置中张力的预报和计算。实验结果表明,该非线性有限元模型可以实现对张力装置中张力准确地计算和预报。
关键词:张力装置;非线性;有限元建模
中图分类号:TG3;TP391.9文献标识码:A文章编号:1001-4551(2009)08-0021-04

Nonlinear finite element modeling of the tension device in the skin pass mill for hot strip
LIU Rong, JIANG Song
(CISDI Engineering Co. Ltd., Chongqing 400013, China)
Abstract: Aiming at realizing forecasts and calculation of the tension produced by the tension device in the skin pass mill for hot strip, using the commercial finite element software MSC.MARE, a nonlinear finite element modeling of the tension device in the skin pass mill for hot strip was built, the forecasts and calculation of the tension produced by the tension device was realized. The test results indicate that the model can comparatively precise forecast and calculate the tension produced by the tension device.
Key words: tension device; nonlinear; finite element modeling
参考文献(References):
[1]池俊成.热轧平整分卷机的功能、设备结构特点及生产应用[J].中国钢铁业,2007(12):26-29.
[2]VALENZUELA M A, BENTLEY J M. Sensorless tension control in paper machines[C]//IEEE Conference Record of Annual Pulp and Paper Industry Technical Conference,2002:44-53.
[3]KOKAN K. New tension control method for hot strip mill[J]. Transaction of the Iron and Steel Institute of Japan,1986,26(3):256.
[4]邹家祥.轧钢机械[M].北京:冶金工业出版社,1995.
[5]王晓东,石锦,史庆南,等.板带轧制有限元建模研究[J].机械,2007,34(2):40-42.
[6]李明志,张占强,施庆彬,等.邯钢热轧带钢平整分卷机组简介[J].轧钢,2002,19(6):45-47.
[7]胡美燕,姜献峰.有限元分析法在接触现象中的应用研究[J].机电工程,2003,20(5):160-162.
[8]郭乙木,陶伟明,庄茁,等.线性与非线性有限元及其应用[M].北京:机械工业出版社,2005.
[9]邓小雷,周兆忠,汪建平,等.工程塑料齿轮疲劳寿命有限元分析[J].轻工机械,2008,25(6):44-47.
[10]丁皓江,何福保,谢贻权,等.弹性和塑性力学中的有限元法[M].北京:机械工业出版社,1989.



友情链接

浙江机械信息网