压电换能器装配液压扭矩扳手设计*

作者：张云电1，刘金涛1，付群利1，诸葛毅2 日期：2009-08-18/span> 浏览：3234 查看PDF文档

压电换能器装配液压扭矩扳手设计*

张云电1，刘金涛1，付群利1，诸葛毅2
（1.杭州电子科技大学 机械工程学院,浙江 杭州 310018;2.浙江苏泊尔集团有限公司，浙江 玉环 317600）

摘要：针对压电换能器传统装配中存在的扭矩不稳定和大批量装配时不能保证统一性与准确性的问题，分析了液压扭矩扳手结构特点及其关键设计，提出了压电换能器装配液压扭矩扳手的具体方案。研究结果表明，该方案实现了大批量压电换能器装配扭矩恒定的要求，也为大批量恒扭矩装配压电换能器奠定了基础。
关键词：压电换能器；装配；液压扭矩扳手
中图分类号：TP211文献标识码：A文章编号：1001-4551(2009)08-0018-03

Design of hydraulic torque wrench in piezoelectric transducer assembly
ZHANG Yun-dian1, LIU Jin-tao1, FU qun-li1, ZHU Ge-yi2
(1. College of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China;
2. Zhejiang Supor Co. Ltd., Yuhuan 317600, China)
Abstract: For piezoelectric transducers that existed in the traditional mode of assembly torque unstable questions, in order to implementing the unity and accuracy of mass assembly for piezoelectric transducer, the construction characteristics of hydraulic torque wrench and the key point for its designation were analyzed and researched, and the concrete schemethe for designing hydraulic torque wrench was given in assembling piezoelectric transducer which achieved requirements of assembling piezoelectric transducer in large quantities. The result indicates that the research establishes the foundation for assembling piezoelectric transducer quickly and accurately in large quantities.
Key words: piezoelectric transducers; assembly; hydraulic torque wrench
参考文献(References):
［1］张云电.超声加工及其应用［M］.北京：国防工业出版社社，1996.
［2］张云电.夹心式压电换能器及其应用［M］.北京：科学出版社，2006.
［3］张云电,付群利.压电换能器袋配机自动控制系统研究［J］.机电工程技术,2008,37(10):28-31.
［4］朱龙根.简明机械零件设计手册［M］．北京：机械工业出版社，1996.
［5］张久成.机械设计基础［M］．北京：机械工业出版社，2000.
［6］隗金文，王慧．液压传动［M］．哈尔滨：东北大学出版社，2003.
［7］CAPONE G, DAGOSTINO V, VALLE S D, et al. Influence of the variation between static and kinetic frietion on stick-slip instability［J］. Wear,1993,161:121-126.
［8］STOLARSKI T A. Analysis of the resistance to motion in a sliding contact［J］. Wear,1994,171(1-2):203-209.
［9］吕迅，金杨福，鲁聪达.压电陶瓷超薄银电极的高平面度加工研究［J］.轻工机械，2007，25（1）：110-112.