Wankel微型转子发动机的设计方案研究

作者：于雷1，郭峥2，马培勇1，聂陈翰1，阿布里提・阿布都拉3，林其钊1 日期：2009-08-18/span> 浏览：3109 查看PDF文档

Wankel微型转子发动机的设计方案研究

于雷1，郭峥2，马培勇1，聂陈翰1，阿布里提·阿布都拉3，林其钊1
（1.中国科学技术大学 热科学与能源工程系,安徽 合肥 230027;
2.安徽建筑工业学院 数理系,安徽 合肥 230022; 3.弘前大学 理工学部，日本 弘前 036-8561）

摘要：针对现有小型转子发动机微型化后存在尺寸较小且装配困难、部分复杂型面无法采用传统加工方式等问题，综合考虑熄火距离对燃烧稳定性的影响，通过对微型发动机基本结构和参数的设计与优化，改善了三角转子发动机的基本性能。采用一体化设计方案简化了转子发动机的零件结构，减少了装配零件数量，降低了装配误差。通过设计慢走丝加工方案，完成了对复杂型面的加工，保证了加工精度，降低了漏气间隙。最后，通过三区准维模型计算得到了微型转子发动机的基本性能参数。研究结果证明了设计方案的可行性，为转子发动机的微型化提供了参考。
关键词：微型转子发动机；微燃烧；三区准维模型
中图分类号：TK05文献标识码：A文章编号：1001-4551(2009)07-0023-05

Research on the design scheme of Wankel micro rotary engine
YU Lei1, GUO Zheng2, MA Peiyong1, NIE Chenhan1, Abuliti Abudula3, LIN Qizhao1
(1.Department of Thermal Science and Energy Engineering, University of Science and Technology of China, Hefei 230027, China;
2.Department of Mathmatics & Physics, Anhui University of Architecture, Hefei 230022, China;
3.Science and Technology Faculty, Hirosaki University, Hirosaki 0368561, Japan)
Abstract: Aiming at solving the problems in miniaturization of rotary engines, such as assembling difficulties in small size, complex surfaces processing problems, considering quenching distance influence on the stability of combustion, performance of a Wankel rotary piston engine was improved through optimizing the basic structure and parameters. Integrated design was adopted to simplify the part structure of the rotary engine and reduce parts quantity and assembling error. Slowtravelling speed method was used in processing of complex surfaces to ensure the machining accuracy and reduce leakage. Basic performance parameters of the micro rotary engine were calculated through a threezone quasi dimension model. The results indicate that the design has feasibility, and it can provide reference for miniaturization of the rotary engine.
Key words: micro rotary engine; microcombustion; threezone quasi dimension model
参考文献(References):
［1］LARS S. Combustion in Microscale HeatRecirculating Burners［C］. The Third AsiaPacific on Combustion,2001.
［2］KELVIN F. Miniaturescale and Microscale Rotary Internal Combustion Engines for Portable Power Systems ［M］. Berkeley: U. C. Berkeley,2001.
［3］FU K, KNOBLOCH A, MARTINEZ F, et al. Design and Experimental Results of SmallScale Rotary Engine［C］//Proc. 2001 International Mechanical Engineering Congress and Exposition (IMECE), New York,2001:11-16.
［4］FU K, KNOBLOCH A J, MARTINEZ F C, et al. Design and Fabrication of a SiliconBased MEMS Rotary Engine［C］//Proc. 2001 International Mechanical Engineering Congress and Exposition (IMECE), New York,2001:11-16.
［5］钟晓晖,王小雷,马重芳,等.微型三角转子发动机的研制与实验研究［J］.机电工程,2007,24（5）:9-11.
［6］张永生,周俊虎,岑可法,等.微燃烧稳定性分析和微细管道燃烧实验研究［J］.浙江大学学报：工学版,2006,40（7）:1178-1182.
［7］张孝友,卫尧,李德桃,等.开发微型发动机燃烧器遇到的问题和解决途径［J］.内燃机工程,2003,24（4）:70-73.
［8］郑精辉,孙暄,杨灿军.气动微型转子发动机的设计和实验研究［J］.机床与液压,2006（12）:101-104.
［9］周乃君,高宏亮,裴海灵.转子凹坑容积对转子发动机性能参数的影响［J］.内燃机,2006（4）:10-12.
［10］辛动.三角转子发动机［M］.2版.北京：科学出版社,1981.
［11］郭峥.微转子发动机的三区准维模型燃烧计算与设计研究［D］.合肥,中国科学技术大学热科学与能源工程系,2006.
［12］YAMAMOTO K. Rotary Engine［M］. Japan: Hiroshima，1981.
［13］张玉峰.小模数齿轮数控慢走丝线切割加工工艺方法的研究［J］.制造技术与机床,2008（8）:84-85.
［14］李海东.慢走丝线切割加工参数对表面粗糙度的影响［J］.机械工程师,2007（11）:35-36.
［15］郭峥,林其钊,阿布里提·阿布都拉.微转子发动机的三区准维模型燃烧计算研究［J］.内燃机工程,2006,27（2）:20-24.