摩托车电喇叭声音性能分析方法研究*

作者：黄丽雯,郭小渝 日期：2009-02-23/span> 浏览：3613 查看PDF文档

摩托车电喇叭声音性能分析方法研究*

黄丽雯,郭小渝
（重庆工学院 电子信息与自动化学院,重庆 400050）

摘要：为实现在生产线上对摩托车电喇叭产品进行合格检测和调试,建立了机动车电喇叭的物理/数学模型，分析研究了声音性能指标参数与电喇叭机械零部件之间的关系，提出了一种通过频域图中包络的幅度值和周期范围对检测结果进行分析，并指导调节喇叭参数的声音性能分析方法,实现了对电喇叭产品的频谱包络、共振峰值的位置和基频周期等合格性指标的有效检测与快速调试。实践证明,该方法行之有效，且操作性强。
关键词：电喇叭;基频;频谱包络;离散傅里叶变换
中图分类号：TB53文献标识码：A文章编号：1001-4551(2009)02-0085-03

Analysis of motorcycle electric horn sound performance
HUANG Li-wen, GUO Xiao-yu
（College of Eleetronic Information & Automation, Chongqing Institute of Technology, Chongqing 400050, China）
Abstract: For realizing the qualified testing and commissioning of motorcycle electric horn products on production line, a plysical/mathematical model of the vehicle electric horn was established. The relationgships of sound performance parameters and mechanical components were studied and analyzed. A analysis method of sound performance was proposed.Using the rate value and cycle of the envelope in frequency domain figure, the test results were analyzed,and the horn parameter adjustment was guided.The efficient testing and quick commissioning of qualified indicators such as frequency spectrum envelope, the resonance peak position, and basic frequency cycle of electric horn products were realized.Practice proves that the method is highly efficient and simple.
Key words: electric horn; basic frequency; frequency spectrum envelope; aseparated Fourier transform
参考文献(References):
［1］国家质量技术监督局.GB/T 14259-1993声学关于空气噪声的测量及其对人的影响的评价的标准指南［S］.北京：中国标准出版社，1993.
［2］国家质量技术监督局.GB/T 17248.2-1999声学机器和设备发射的噪声工作位置和其他指定工作位置发射声压级测量一个反射面上方近似自由场的工程法［S］.北京：中国标准出版社，1999.
［3］程佩青.数字信号处理教程［M］.北京：清华大学出版社,2004.
［4］EMMANUEL C, BARRIE W. Digital Signal Processing A Pratical Appreach［M］.2nd ed.北京:电子工业出版社,2003.
［5］王晓亚.倒谱在语音的基音和共振峰提取中的应用［J］.无线电工程，2004, 34 (1)：57-58.
［6］ABU-SHIKHAH N M, ALOQUILI O. A new spectrum envelope estimation technique based on sample projections［J］. Signal Processing,2007,87(10):2446-2454.