基于APDL的柔性铰链位移放大机构*

作者：邹翔，李国平，沈杰，韩同鹏 日期：2009-02-23/span> 浏览：3149 查看PDF文档

基于APDL的柔性铰链位移放大机构*

邹翔，李国平，沈杰，韩同鹏
（宁波大学 工学院，浙江 宁波 315211）

摘要：针对压电陶瓷微位移驱动器输出位移范围小的局限性，应用柔性铰链位移放大原理，设计了一种柔性铰链微位移放大机构，提出了柔性铰链杠杆放大机构的参数化数学建模方法，并采用ANSYS参数化程序设计语言（APDL）编写了柔性铰链杠杆放大机构的建模和仿真分析程序。仿真试验表明，所设计的柔性铰链杠杆放大机构的输入位移与输出位移线性度高,实际放大位移与理论值相差5%，完全可以满足机构的微位移放大要求。
关键词：柔性铰链；ANSYS参数化设计语言；位移放大；仿真分析
中图分类号：TH122文献标识码：A文章编号：1001-4551(2009)02-0070-03

Displacement magnifying mechanism with flexible hinges based on APDL
ZOU Xiang, LI Guoping, SHEN Jie，HAN Tongpeng
(Faculty of Engineering, Ningbo University, Ningbo 315211, China)
Abstract: In order to magnify the output displacement of piezoelectric actuators, a displacement magnifying mechanism with flexible hinges was developed for piezoelectric actuators. Its parametric modeling method was proposed, and it was also analyzed by using ANSYS software parametric design language for finite element analysis. The test results indicate that the linearity degree is high between the output displacement and the input displacement of the magnifying mechanism with flexible hinges, and the error of the real output displacement of the magnifying mechanism with flexible hinges is below five percent by the data on principle of displacement magnifying mechanism output displacement. It is proved that the mechanism can meet the requirements of the displacement magnification.
Key words: flexible hinge; ANSYS parametric design language (APDL); displacement magnification; simulation and analysis
参考文献(References):
［1］刘德忠,许意华,费仁元,等.柔性铰链放大器的设计与加工技术［J］.北京工业大学学报,2001，6(2)：161-163.
［2］王隆太，周志平,马志新.柔性铰链位移放大机构放大能力和负载能力分析［J］.机械设计,2007，24（7）：11-13.
［3］黄金永，魏燕定，张炜.空间微幼平台的柔性铰链参数优化设计［J］.机电工程,2006,23(1):55-57,46.
［4］SMITH T S, BADAMI V G, DALE J S, et al. Elliptical. flexure. hinges［J］. REV.Sci.Instrum,1997,68(3):1474-1483.
［5］SMITH S. Flexures: Elements of Elastic Mechanisms［M］. New York: Gordon and Breach Science Publishers,2000.
［6］LOBONTIU N, PAINE J S, NIGERIA E, et al. Cornerfilleted flexure hinges［J］. Journal of Mechanical Design,2001,123(3):346-352.
［7］PAROS J M,WEISBORD L. How to design flexure hinge［J］. Machine Design,1965,37:151-157.
［8］龚曙光,谢桂兰.ANSYS操作命令与参数化编程［M］.北京:机械工业出版社,2004.