汽轮压缩机组机械式控制系统的现代化改造

作者：丁晨,戚志清 日期：2008-12-26/span> 浏览：3297 查看PDF文档

汽轮压缩机组机械式控制系统的现代化改造

丁晨,戚志清
（杭州汽轮机股份有限公司，浙江 杭州 310022）

摘要：为实现对汽轮压缩机组原有的机械式控制系统的现代化改造，采用了CCC压缩机电子集成控制系统，BENTLY Nevada 3500轴系监测系统（TSI），SIEMENS S7 PLC机组保护系统（ESD）和工程师站/操作员站等现代电子控制设备，提高了控制精度，实现了利用数据通讯和网络监控以使机组长期稳定运行的目的。实践应用结果证明，用现代电子控制设备对汽轮压缩机组老旧的机械式控制系统进行现代化改造是切实可行的。
关键词：汽轮压缩机组;控制系统改造;汽轮机监视仪表;紧急停机;工程师站/操作员站
中图分类号：TK262文献标识码：A文章编号：1001-4551(2008)12-0096-04

Retrofit for mechanical control system of turbine-compressor string
DING Chen, QI Zhi-qing
（Hangzhou Steam Turbine Co. Ltd., Hangzhou 310022, China）
Abstract: In order to retrofit the original mechanical control system of turbine-compressor strings modern electronic equipment, integrated electronic compressor control system from compressor controls corporation(CCC), BENTLY Nevada 3500 for turbine supervisory instrumentation(TSI) system, and SIEMENS S7 PLC for emergency shut-down(ESD) as well as engineer/operator-station were employed, thus control accuracy was improved, data communications, monitoring and operation via network, and furthermore, long-time stable operation of the string were realized. The results indicate that it is feasible to retrofit the old mechanical control system of turbine-compressor string by employing modern electronic equipment.
Key words: Turbine-compressor string; control system retrofit; turbine supervisory instrumentation(TSI); emergency shut-down(ESD); engineer/operator-station
参考文献(References):
［1］徐忠.离心式压缩机［M］.北京:机械工业出版社,1988.
［2］侯曼西.工业汽轮机［M］.重庆:重庆大学出版社,1995.
［3］Compressor Controls Corporation. Series 3 Plus Anti-Surge Controller for Axial and Centrifugal Compressors［M］. Compressor Controls Corporation,2001.
［4］黄钟岳,王晓放.透平式压缩机［M］.北京:化学工业出版社，2004.
［5］MCLEISTER L. Compressor Anti-Surge Technology［M］. Woodward,1997.
［6］BENTLY Nevada Corporation. 3500 RACK Operation and maintenance Manual［M］. BENTLY Nevada Corporation,1999.
［7］SIEMENS. Simatic动化系统S7-400容错系统使用手册［M］.SIEMENS,2002.