《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

按订单装配型定制产品配置设计过程研究*

作者:鲁玉军1,钟文明2,祁国宁3 日期:2008-06-23/span> 浏览:3547 查看PDF文档

按订单装配型定制产品配置设计过程研究*

鲁玉军1,钟文明2,祁国宁3
(1.浙江理工大学 先进制造技术研究所,浙江 杭州 310018;
2.聚光(杭州)科技有限公司,浙江 杭州 310052; 3.浙江大学 现代制造工程研究所,浙江 杭州 310027)

摘要:大批量定制环境下的按订单装配型(ATO)产品配置设计是一个利用已有标准化、模块化组件快速实现客户定制产品的过程。为了详细研究ATO产品配置设计过程,在给出了ATO产品配置设计基本概念的基础上,讨论了ATO产品配置设计原理,提出了将其设计过程划分为3个阶段和5个域的方法。研究结果表明,通过该方法有利于企业更好地实现ATO产品的定制设计,更快地满足客户的个性化需求。
关键词:大批量定制;按订单装配型(ATO)产品;配置设计过程
中图分类号:TP391文献标识码:A文章编号:1001-4551(2008)05-0024-05

Research on configuration design process of assembletoorder product
LU Yujun1, ZHONG Wenming2, QI Guoning3
(1.Institute of Advanced Mechanical Technology, Zhejiang SciTech University, Hangzhou 310018, China;
2.Focused Photonics (Hangzhou) Inc., Hangzhou 310052, China;
3.Institute of Contemporary Manufacturing Engineering, Zhejiang University, Hangzhou 310027, China)
Abstract: Configuration design of assembletoorder (ATO) product for mass customization is a rapidly custom process with standardized and modularized modules. The concept and principle of configuration design of ATO product was introduced firstly. With regard to this design process, a method was presented to decompose this process into three phases and five domains. The results show that the method can be favor of the enterprise implements custom design of ATO product rapidly and satisfies individual demands.
Key words: mass customization; assembletoorder (ATO) product; configuration design process
参考文献(Reference):
[1]RONALD L. Mass customization: the next industrial revolution[J]. Industrial Management,1995,37(5):18-19.
[2]HALAL W E. The top 10 emerging technologies[J]. The Futurist, 2000,34(4):29-38.
[3]GILOVANI D S, DENIS B, FLAVIE S F. Mass customization: literature review and research directions[J]. International Journal of Production Economies,2001,72 (1):1-13.
[4]祁国宁,顾新建,李仁旺.大批量定制及其模型的研究[J].计算机集成制造系统CIMS,2000,9(9):776-783.
[5]祁国宁,顾新建,谭建荣,等.大批量定制技术及其应用[M].北京:机械工业出版社,2003.
[6]鲁玉军,祁国宁.基于MC环境的面向订单的产品设计方法研究[J].中国机械工程,2006,17(22):2354-2358.
[7]SUH N P. The Principles of Design[M]. New York: Oxford,1990.



友情链接

浙江机械信息网