《机电工程》杂志,月刊( 详细... )

中国标准连续出版物号 ISSN 1001-4551 CN 33-1088/TH
主办单位浙江省机电集团有限公司
浙江大学
主编赵 群
副 主 编唐任仲、罗向阳(执行主编)
总 经 理罗向阳
出 版浙江《机电工程》杂志社有限公司
地 址杭州市上城区延安路95号浙江省机电集团大楼二楼211、212室
电话Tel+86-571-87041360、87239525
E-mailmeem_contribute@163.com
国外发行中国国际图书贸易总公司
订阅全国各地邮局   国外代号M3135
国内发行浙江省报刊发行局
邮发代号32-68
广告发布登记证:杭上市管广发G-001号

在线杂志

当前位置: 机电工程 >>在线杂志

西门子PLC控制大量步进电机的应用研究*

作者:申立琴,马彩文,田新锋 日期:2008-06-23/span> 浏览:3515 查看PDF文档

西门子PLC控制大量步进电机的应用研究*

申立琴,马彩文,田新锋
(中国科学院 西安光学精密机械研究所,陕西 西安 710119)

摘要:神光Ⅲ工程的激光参数测量系统电控工程设计要求网络通信能力强,且系统可靠性高,而西门子PLC具有可靠性高、功能强大、使用方便、编程简单、抗干扰强等优点,在工业控制领域得到了广泛应用。采用西门子S7200 PLC的两路脉冲输出控制2台步进电机,S7300 PLC作为总的处理器处理多个S7200的信息,同时与工业以太网之间采用PROFIBUS进行现场总线通信,实现了西门子PLC对大量步进电机的控制和与主控系统进行高效率通信的功能。在实验的基础上验证了该方案的可行性,并且它可以降低现场设备连接的工作量和费用,保证系统的可靠性。
关键词:可编程逻辑控制器;步进电机;PROFIBUS;工业以太网;通信
中图分类号:TP273文献标识码:B文章编号:1001-4551(2008)05-0009-04

Applied research on controlling a large number of steppermotors by Siemens PLC
SHEN Liqin, MA Caiwen, TIAN Xinfeng
(Xian Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xian 710119, China)
Abstract: Shenguang Ⅲ laser measurement system electric control engineering design required good communication and reliability, and Siemens PLC with high reliability, powerful, easy to use and simple programming, and good antiinterference in the field of industrial control has been widely applied. S7200 who could output two pulse was used to control two stepper motors. S7300 was used as the processor to handle the information of many S7200s. On the other hand, S7300 communicated with Ethernet based on PROFIBUS. In this way, the control of Siemens PLC to a large number of steppermotors and communication with main control system on highefficiency were realized. The feasibility of the was verified based on experiment, reduces the field devices connected to workload and costs, and ensures the reliability of the system.
Key words: programmable logic controller (PLC); steppermotors; PROFIBUS; Enthernet; communication



友情链接

浙江机械信息网